Communication Air Supply Ltd.Back to Products page

COMPAC I & II | MINIPAC | ECU 70&77 | COUNTERFLOW | MOTOPAC

COUNTERFLOW
Wall Mount Air Conditioner
Model ADP36-48-60

click image to view unit dimensions

The Marvair COUNTERFLOW Air Conditioner offers unique benefits in applications requiring low supply air outlet. Typical instillations include buildings for magnetic resonance imaging (MRI), computer rooms, electronic equipment shelters, and uninterrupted power supply (UPS) buildings. The Marvair air conditioner is an energy and space saving unit designed to offer maximum indoor comfort without using outside ground space or indoor floor space. The unit can be easily mounted on an outside wall with the supply opening at or under floor level. Factory or field installed accessories can be used to meet specific requirements.

Advantages over field modified systems include these standard features:

Designed for Operation in Low Ambient Conditions
- Low ambient control cycles condenser fan to regulate refridgerant pressures.
- Timed low pressure by-pass for start-up of A/C below 20ºF and down to 0ºF (ComPac I only)
- Factory built-in economizer (ComPac II only)

High Efficiency
- All units meet or exceed current National Appliance Energy Conservation Act requirements.
- Lanced fins and rifled tubing on many condenser and evaporator cells.

Built-In Reliability
- High and low pressure switches with lockout relay protects refridgerant circuit.
- Time delay/anti-short cycle timer
- Dual condensate drains with internal traps.
- Two rainwater drains from condenser section to unit's base.
- Factory-installed circuit breaker on all 208/230V units (optional on 460V units).

Rugged Construction
- Copper tube, aluminum fin evaporator and condenser coils.
- Factory-installed heaters on discharge side of evaporator coil (optional)
- Baked-on neutral beige finish over galvanneal steel for maximum cabinet life (other finishes are available).
- Built-in full length mounting flanges and sloped top for minimized chance of water leaks.
- Compressor location on the isolated vented bottom shelf for shipping and mounting stability.

Ease of Service
- Service access valves are standard.
- Easy access to controls without disturbing indoor air flow - no ladder required.
- Front Control Panel allows easy access and complies with NEC clearance codes on redundant systems (two units side by side).

Remote Alarm Capability
- Dry contacts can be used for remote alarm or notification upon air conditioner lockout.

 

back to Products page go to Parts & Service

PARTS+SERVICE | THE COMPANY | WARRANTY | CONTACT | HOMEPAGE